| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46881 | ForcePad: Finger in deadzone causes corrupted force model | Implement filters to protect against force model corruption when a finger is not in the active region of the ForcePad. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46881 | ForcePad: Finger in deadzone causes corrupted force model | Implement filters to protect against force model corruption when a finger is not in the active region of the ForcePad. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46146 | Remove some sentences about click-drag from help and html | Removed unneccessary words from html and help about ForcePad click-drag. |
| TP-45965 | Linux Bullet Fn+F2 not working | Fix an issue that Linux Bullet Fn+F2 not working |
| TP-46128 | Per HP Request add new features and change default settings. | Enabled rotate for Win7 by default. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46141 | Left button click was triggered if there are three fingers in the button zone. | Fixed the issue that left clicking was triggered if there are 3F in the resting button zone. |
| changed default scroll continuation slider position. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45981 | Create a link on desktop and Metro during the driver installation so end user can click the link to laucn your CPL. | Create a link on desktop and Metro during the driver installation. |
| TP-46128 | Per HP Request add new features and change default settings. | Added a new feature and adjusted default settings. 1 Change ‘Enable Force-enhanced gestures’ to checked. 2. Enable rotate by default. 3. Adjust button zone height to 16mm. 4. Add "ForcePad Settings" in tray icon. 5. Disable resting finger+MF gestures because it affects normal pinch and 2F scrolling performance. |
| TP-46130 | FP: need to add a slider to control the force continuation of 2f scrolling | Added a UI slider to adjust the scrolling speed when using force to continue 2-finger scrolling. Also added a cap to limit the max scroll amount regardless of the amount of force applied. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46066 | 2F click & drag terminates when the force is relaxed = make it similar to 1F click & drag | Added code to support 2F drag with force released. |
| TP-46104 | With a resting palm, the left click is not released until the palm is removed. | Fixed the left click is not released issue if there is a resting palm on the pad. |
| TP-46100 | Adjust edgemotion zone | Reduced edge motion zone by 50% from default. |
| TP-46101 | Add scrolling with force videos for Windows 8 | Added two fingers drag video.; Added scrolling video with force for Win8. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46056 | 2F clicking still happens sometimes even 2F clicking is disabled | Fixed 2F clicking still happens sometimes even 2F clicking is disabled. |
| remove carriage return in correction table | ||
| Add the default force model back | ||
| TP-46067 | Lower 2F clicking force release threshold | Rolled back previous fix for relaxing 2F clicking release force threshold. |
| TP-46084 | Change short cut link label on the Desktop | Changed the label of desktop icon "ForcePad User Guide & Settings" to "ForcePad Settings". |
| TP-46085 | After palm lifts the right edge swipe can be triggered anywhere when you swipe your finger. | Fixed right edge swipe got triggered when you swipe your finger anywhere after palm lifts . |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-46054 | Continuous button click in top corners | Even if it is palm or non-finger we still need to reconstruct the force info. Otherwise it causes clicking toggling in top corners. |
| Provide registry configurable way to adjust ForcePad 2F scrolling cap | ||
| TP-46050 | Short Cut Files are not Deleted after the driver uninstalled. | Fixed shortcut files are not deleted after the driver uninstallation. |
|
TP-46053 (996098) |
Palmcheck sensitivity is not working as described | Fully disable palm rejection when the PalmCheck slider is set to the "off" position. |
| TP-46067 | Lower 2F clicking force release threshold | Lower 2F clicking release force threshold, and made 2F drag easier. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| set ForcePad volume to 25% of system volume by default | ||
| Save ForcePad force model to new registry location | ||
| lower force continuation of gesture threshold | ||
| Per usqbility group request to adjust following thresholds 1, Changed 1F clicking force threshold from 280gams to 200grams. 2, Changed 2F clicking force thresould from 330grams to 250grams 3, Changed clicking release force threshold from 100grams to 75grams if dragging while there is a resting finger in resting button zone. | ||
| Turned ACM 2 off. | ||
| Fixed a problem with edge motion not working for click drag under certain circumstances. | ||
| TP-46006 | Pinch and 2F scrolling performance is worse than Lenovo X1 Carbon | Improve 2F gesture with at least one finger in button zone. |
| TP-46037 | Set clicking suppression timeout to 0 after palm is lifted | Adjusted clicking release force threshold. |
| TP-46041 | Create a html page to show forcepad gesture helps and demo video | Created a html to show forcepad gestures help and demo video. |
| TP-46042 | Add force continuation gestures video | Added demo videos for force continuation gestures |
| TP-46043 | Adjust 1F and 2F clicking force threshold. | Per usqbility group request to change 2F clicking release force thresould to 150grams |
| Issue Number | Description | Fix Comment |
|---|---|---|
| update default force model based on latest in-system scan | ||
| update correction table based on latest in-system scans | ||
| Disable 1F drag 500 mS timeout for drops | ||
| Adjust delta threshold for force continuation of 2F scrolling | ||
| Add the default ForceModel back to the install | ||
| Modify thresholds for force continuation of 2F scroll and pinch | ||
| TP-45981 | Create a link on desktop and Metro during the driver installation so end user can click the link to laucn your CPL. | Create a link on desktop and Metro during the driver installation. |
| Fixed a problem with force continuation of 2F scrolling moving in the wrong direction. Also fixed a problem related to large delta values being calculated when fingers are quickly "flicked" off the pad during 2F scrolling. | ||
| TP-46030 | Hide edgemotion speed selection | Hidden edgemotion speed selection readio buttons. |
| TP-46033 | Change "Enable Force" to "Enable Force-enhanced Gestures" | Changed "Enable Force" to "Enable Force-enhanced gestures". |
| TP-46037 | Set clicking suppression timeout to 0 after palm is lifted | Set clicking suppression timeout to 25ms after palm is lifted.; Set clicking suppression timeout to 0 after palm is lifted. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| Fixed a BSOD when there are more than three fingers on ForcePad. | ||
| update ForcePad correction table based on latest in-system scan. | ||
| Fixed drag lock to have a 500mS default timeout before release when finger is lifted. | ||
| TP-45467 | Add new help strings for ForcePad | Add help context to Branch.; Add HelpIDs for ForcePad UI |
| TP-45467 | Add new help strings for ForcePad | Add helpIDs for ForcePad UI in branch. |
| TP-45992 | Change default settings | 1, Enabled edgemotion for drag. 2, Set "Enable Force" to unchecked. 3, Set 1F horizontaol scrolling to unchecked on Windows 8. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45934 | Add different force release threshold for 2F drag there is one finger in the button | Added another force release threshold for 1F resting + another finger drag. |
| TP-45976 | Skip force calculation for Palm | Skipped force calculation for palm object.; Skipped force calculation if there is only palm without any finger. |
| TP-45977 | Add "Enable Force" in the tray icon to disable/enable force continuation. | Added control option "Enable Force" in tray icon that allows end user to enable/disable force conitnuation pinch and scrolling, and 2F clicking. |
| preserve user set ForcePad volume level. | ||
| Added a link to the Volume Mixer to control ForcePad volume. | ||
| Adjust the speed of force continuation of scrolling. | ||
| Set the release timeout to be 500 mS for all 1F drags. | ||
| Update button click/release sound files | ||
| adjust size of ForcePad volume button in the control panel | ||
| Added a link to the Volume Mixer to control ForcePad volume. Also set the default timeout for 1F drag release to be 500 mS. | ||
| add registry entry to enable ACM20 | ||
| TP-45965 | Linux Bullet Fn+F2 not working | Fix an issue that Linux Bullet Fn+F2 not working |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45281 | Click action is not consistent | Added registry control to enable/disable 1Palm+MF clicking. |
| TP-45755 | resting palm + 1F click or 2F click support | 1, Used ClickSmart for 2F click in ForcePad, we don't need to consider the force. 2, Made 1Palm+1F and 2F click work. |
| TP-45756 | resting palm + 2F tap | Fixed bit mask. Reimplemented MF tap with resting fingers in button zone. |
| TP-45918 | Add FW RawPacket Position filter to the driver | Add FW RawPacket Position filter to the driver |
| Added an error condition to alert the user when the Correction Table is not found. | ||
| Add ForcePad calibration data to the diagnostic report | ||
| TP-45886 | FP: Need to preserve the mute status of the ForcePad audio feature so it's persistent even after reboot | Save the mute status of the ForcePad audio feature. |
| TP-45887 | Adjust edge swipe zone for HP platforms | Adjusted edge swipe zone for a Ricochet, Rampage and Renegade. |
| Issue Number | Description | Fix Comment |
|---|---|---|
|
TP-44750 (20130628 meeting with Kirk) |
After log file capture Kirk would like the default folder opened so that the log file can be copied or viewed instead of just closing | Add option for user to open log file folder after collecting diagnostic info |
| TP-45827 | Add option to show progress either in current command prompt window or show it in another command prompt window title | Added an option to show progress either in current command prompt window or show it in another command prompt window title |
| TP-45857 | FP: need to set volume level depending on Master Volume scale | Set ForcePad volume based on master volume setting |
| Issue Number | Description | Fix Comment |
|---|---|---|
| Added HID mouse filter callback functions. | ||
| TP-45582 | BSoD on WHCK test | Keyboard filter driver should pass specific IOCTL to function driver. |
| TP-45786 | BSOD 0x1E occur when customer uninstall driver | For uninstall case, we still need to unregister notification handler. |
| TP-45792 | 988033 Touchpad cannot be disabled/Enabled by hotkey(Fn+f2)on bullet unit | Fix Mux KBC if touchpad is connected to port 1, 2 or 3. |
| TP-45801 | Keep motion/tap/gesture suppression after palm before timeout | Last palm time stamp variables were reset. Fix "keep motion/tap/gesture suppressed after palm before timeout" feature. |
| TP-45803 | Show right asic type from Diag. page | Show right ASIC type for 1320 and 1321 on Diag. page. |
| Added correction tables for TM2685-07 and TM2695-08 ForcePads. | ||
| TP-45290 | Suppress Click for Left Edge Swipe | Disable clicking during Left Edge Swipe |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45582 | BSoD on WHCK test | Fix BSOD when doing system WHCK test |
| TP-45663 | BSOD for WHCK "Fault Injection Test" | Fix WHCK Fault Injection Test |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-44637 | Testarossa - BITS087995: [PT_TSA]Sometimes mouse cursor don't change icon as scrolling | Added fix to show custom cursor correctly. |
| TP-45194 | English description on Simplified Chinese OS | Update translations |
| TP-45590 | BSOD 0x10D occur when doing Restart,S3 and S4 +LAN (Right usb port) 14 hours | Unregister RMI callback func before register it. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45504 | Spyder ULT - There is no function after install driver | Pass the WdfRequest handle to the WDF function . |
| TP-45288 | Enable 1Palm + 1F pointing and tap | Enable 1Palm + 1F pointing and tap |
| TP-45292 | Adjust 2F Scrolling force continutation threshold | Fixed continuation of pinch/scroll on the ForcePad when applying small amount of force. |
| TP-45293 | Inertia is not always initiated | Relax criteria for 2F vertical scrolling inertia. |
| TP-45295 | Sometimes pinch-out results in zoom out (opposite effect) before it starts zoom-in in Maps application | Fixed a problem with the zoom direction when using force to continue the pinch gesture on the ForcePad. |
|
TP-45515 (978689) |
the settings in Touchpad Synapatics Control Panel is gray after perform 3Finger-Flicking forward/backward function in FireFox | the settings in Touchpad Synapatics Control Panel is gray after perform 3Finger-Flicking forward/backward function in FireFox |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45258 | OEM_project_ (SYN1E62) - BSOD after installing v17.0.9 driver | Use InterlockedExchange() and add comments. |
| Update ForcePad correction tables based on latest scans. | ||
|
TP-45199 (933574) |
933574 IPE-SLED11 SP2/30.10.1/Thriller 1.0/Touchpad light doesn't tune amber when Double tapping on Up-Left corner to Disable Touchpad. | Fix an issue that touchpad LED does not get turned on/off when disable/enable the touchpad |
| TP-45282 | Audio feedback is not working properly | Disabled group filter for resting finger temperarily because of bugs, we will enabled it after the issue is fixed. |
| TP-45363 | 968369 M-HOUFIT: Win7-64: BSOD x9F Occurred when system Idle on DC during lunch time (Issue is intermittent with high failing rate 2/5) | After switching to PS2 mode in SMB mode when system goes to suspend, hibernation, or reboot, we need to set right LED state if it has LED support. |
| TP-45365 | FP: RMI ForcePad not reading centerpress Y location correctly | Fixed the reading of the XY location from the firmware for the ForcePad centerpress calibration |
| TP-45422 | FNC_PE_WIST: Corner click action has no video demo in touchpad CUI | Added corner click video. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45096 | Device fails detection after reflashing fw using SynapticsReflash found in v17_0_7 | Fixed Device fails detection after reflashing fw |
| TP-45258 | OEM_project_ (SYN1E62) - BSOD after installing v17.0.9 driver | Use atomic variable to avoid reentry and add timeout mechanism as well. |
| TP-45317 | Force continuation default settings were overwritten by Win8 settings. | Fixed wrong force continuation setting for Windows 8. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45258 | OEMEnvy (SYN1E62) - BSOD after installing v17.0.9 driver | Rollback codes. It seems problem to call Mutex acquire function in DPC. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-45025 | After use touchpad to reboot system, it would BSOD in OS | Check IRQL before calling RtlQueryRegistryValues function. |
| TP-45111 | Mode switch failed on Win8.1 | Suppor OEM SMBus Host Controller. |
| TP-45147 | Cusor jumps with OEM 5BFP | Add mechanism to avoid reentry for SMBus driver. Port reentry avoidance mechanism to CRMIPort. |
| TP-44497 | FP: force reconstruct is yielding lower than expected values | Modify correction factor for TM-2685 based on new alpha value. Added correction table for TM-2909.; Added correction table for TM2685--005.; Modify force algorithm to use correct alpha scaling value; Added correction table for TM2685--005. |
| TP-44996 | FNC_PE_FOX: The left edge swipe action has no function on Vanhalen. | Adjusted left swipe zone for Vanhalen |
| TP-45125 | SmartSense doesn't work well when the touchpad size is small | Fixed SmartSense doesn't work well when the touchpad size is small.; Rolled back previous change. |
|
TP-45199 (933574) |
933574 IPE-SLED11 SP2/30.10.1/Thriller 1.0/Touchpad light doesn't tune amber when Double tapping on Up-Left corner to Disable Touchpad. | Fix an issue that touchpad LED does not get turned on/off when disable/enable the touchpad |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-42303 | Improve Driver build process and release note for customers | Remove useless notification in middle of build; Fix file verification script; Fix UTF-8 failure to translate non-ASCII apostrophe in release notes |
| TP-44354 | Horizontal two finger scrolling can't work on PDF file via win8 PFD APP | Fix horizontal scrolling becomes vertical scrolling in Metro simple Chinese pdf reader |
| TP-44770 | Bonsai - Can not use zoom in/out function after put a third or more fingers on the touchpad | Avoid canceling pinch action when more finger down feature is set. |
| TP-44975 | WHCK Failure (PS/2) - 17.0.5.3 | HPConsumer.inf (Next/Blue) | Added Synaptics generic compatible ID *SYN0002 for all PS2 touchpad infs; Added a hack until Microsoft fixes its WHCK tool |
| TP-45042 | Scrolling is not smoothly on metro app Photos and Camera while ZoomPerfect is enabled | Fix injection error for 2 finger scrolling gesture under Metro-mode app. This error will cause scrolling not smooth. |
| TP-44497 | FP: force reconstruct is yielding lower than expected values | Fixed calculation of ForcePad force model size. |
| TP-44776 | FP: Need warning message when ForcePad does not have calibration values in the firmware | Temporarily remove calibration validation for USB Forcepads as this data is currently not accessible via USB. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-44571 | Spyder ULT - Default setting is incorrect | Duplicate of ClickpadViews, ClickpadViewModel for OEM Win7 UI for 2013. |
| TP-44879 | OEMWPF TPPB - modified Win7 UI for 2013 | Changed help text. Added new help text, all in English for now. |
| TP-44776 | FP: Need warning message when ForcePad does not have calibration values in the firmware | Inform the user if the ForcePad does not contain valid calibration data in the firmware. |
| TP-45037 | Lower LED level it is too bright | Adjusted LED to level 3 for HP Cyclone. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| Display ACM 2.0 type in Diagnostic panel | ||
| TP-44941 | Getting wrong register offset of ACM20 existence for old FW | Parsing ACM2.0 existence information correctly.; Update the packrat number.; Provide ACM2.0 disabled setting. |
| TP-44562 | [Linux] Empty main window "property of Synaptics LuxPad V7.5" | Fix an issue that touchpad settings button is disabled in touchpad control panel on Linux platforms |
| TP-44813 | PS/2 driver v17.0.3 failed in Win8.1 WHCK test | Fix DevFundInfTest fail since the inf has Compatible ID that begin with ACPI |
| Issue Number | Description | Fix Comment |
|---|---|---|
| Follow-up: add registry overrides for RMI4 caps; Add RMI4 capabilities query to API | ||
| TP-44188 | Customer wants previous release notes combined with current release notes | Add a "history" feature to ReleaseNotes.HTML; Build script now creates a history from previous release notes |
|
TP-44828 (958966) |
It will pop up the error "SynTPEnh.exe-Entry Point Not Found" at the end of insttalling Synaptics driver on Vista 32&64. | Fixed SynTPEnh and SynTPHelper crash in Vista with driver built with Vs2012 |
| TP-44497 | FP: force reconstruct is yielding lower than expected values | Fixed ForcePad calibration constructor to use correct overloaded operator. |
| TP-44790 | PNPID request: HPnewUI.inf and HP_uxui.inf | Added new PnP ID. |
| TP-44813 | PS/2 driver v17.0.3 failed in Win8.1 WHCK test | Fix DevFundInfTest fail since the inf has HW Id or Compatible ID that begin with *pnp |
| TP-44830 | BSOD(SynTP.sys) happened when resume from S3 on Velma Win8.1 | Fixed a BSOD which was caused by NULL filter during device detection. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| Do fixme and handle F11 data offsets properly. Still a wip since a large number of F11 data registers remain unchecked in the interrupt handler. | ||
| TP-44721 | Geasture issue on Google Chromewith High DPI setting | Fixed issue of two finger scrolling not working when cursor is near the right edge of the window with DPI=150% |
|
TP-44750 (20130628 meeting with Kirk) |
After log file capture Kirk would like the default folder opened so that the log file can be copied or viewed instead of just closing | In Windows 8.1 Preview, the GetVersion(Ex) APIs have been deprecated.; In Windows 8.1 Preview, the GetVersion(Ex) APIs have been deprecated. Update Manifest |
| TP-44776 | FP: Need warning message when ForcePad does not have calibration values in the firmware | Added a warning message to the user when the ForcePad does not contain calibration values in the firmware. |
| TP-44778 | FP: Disable drag+force release for 2F case | Cancel the drag after force was released for 2F case. |
| TP-44790 | PNPID request: HPnewUI.inf and HP_uxui.inf | Added new PnP ID. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-42303 | Improve Driver build process and release note for customers | For release notes, if "Contact" field is missing, print the Creator of the Jira issue; Create a default empty dictionary in case JSON load fails for invalid and missing Jira numbers; Use Python decode('utf-8-sig') to strip byte order mark out of text; Do not distribute Release.txt any more since it is not updated. Use ReleaseNotes.html. |
| TP-43964 | ACM 2.0 change of algorithm strength driver meta-bug | Make contact type interface consistent. Add HasACM2() query. |
|
TP-44618 (TM-2768-001) |
The systray icons will flicker when scrolling in a photos viewer with three finger flick | Only turned on IME workaround for twist action instead of all gestures for Photo Viewer. |
| TP-44682 | Use maximum force instead of total force for multiple fingers click | Used maximum force instead of total force for MF click. |
|
TP-44692 (ECR177029, ECR176429) |
Copyright issue | Update Coypyright to 1996-2013 |
|
TP-44292 (O934180) |
Demo will show black after idle 3 to 5 minutes on LuPad setting UI | Fixed demo video showing black after idle 3 to 5 minutes on LuxPad Settings UI. |
|
TP-44652 (Email from Jason Ting) |
FORCEPAD CONTROL LED FUNCTION | Enabled KBC notification when TouchPad is enabled or disabled for SYN300D. |
| TP-44683 | Move common section to oemcommcntrl and add more notches in ForceClickThreshold control | Moved forceclick threshold control UI to oemcommctrl, and added more notches in the control.; Removed buttons pseudo device for HP Bullet. |
| TP-44684 | Adjust TotalForceClickThreshold for HP Bullet | Adjusted TotalForceClickThreshold for HP bullet. |
| TP-44686 | Adjust LED level from 8 to 5 for all HP commercial platforms. | Adjusted LED level from 8 to 5 when TouchPad is disabled. |
| TP-44687 | Disable User Mode Force from Compiling Time, Otherwise Force Continuation Gestures Won't Work. | Disabled user mode force calculation, it is done in kernel, otherwise force gesture continuation won't work. |
| TP-44700 | Missing Force Information from Diagnostics Page for InterTouch ForcePad | Fixed missing force information in Diagnostics page for InterTouch ForcePad. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-44299 | Right side, down side "Return at edge of screen" in Momentum doesn't work | Fixed the bounce off screen edge in momentum not working issue with high DPI. |
| TP-43853 | Two-Finger Click Implementation on ForcePad | Added threshold to clicking in order to distinguish between Left and Right click when 2 fingers are on the pad. |
| TP-44562 | [Linux] Empty main window "property of Synaptics LuxPad V7.5" | Fix an issue that device list in Linux control panel is empty |
| TP-44617 | 953569 FNC_PE_WIST/Touchpad: Disable (uncheck box) "Enable coasting "has no function. | Since HP UI only has one checkbox to control both coasting and inertia, set right configuration flag to tell the driver using coasting flag. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-44440 | Convert packet count to time | Improve taps-Convert packet count to time.; Make gesture work properly for different report rates of devices; Make PalmOnPad gesture works normal for various report rate of devices.; code improve by rename a function.; Add a utility function to clear packet. |
| TP-44531 | Silent Uninstallation fail in in toshiba.inf | Silent Uninstallation fail with SynIsdll built with Vs2012; Silent Uninstallation fail in in Win8 x64 |
| TP-44533 | Application crashes when we double tap on the top left corner of the TP to disable the touchpad in HPNEWUI v17.0.0 | Changed call convention from std to cdecl to fix syntpenh creash when it reads Png file. |
| TP-44564 | ACM2.0 can't work on OEM machine | FollowUp:Change uiQuery36Offset -- to uiQuery36Offset--.; Correct RMI query parsing. |
|
TP-43625 (921264) |
The right click no function via Forced Pad. | Removed ForceModel temperarily. |
| TP-44398 | Check box for buttons is missing in HPNEWUI and when I click or tab next to buttons buttons get disabled | Removed hidden controls from TouchPad button device and Styk button device. |
| TP-44419 | 2 finger horizental scrolling will switch picture in Windows Photo Viewer | Disabled 2 finger horizontal scroll for all photo applications to avoid sending left/right key to photo Apps |
| TP-44525 | 17.0.0 HPnewUI no video for Buttons | Fixed Control Panel no video issue in the Buttons page. |
| Issue Number | Description | Fix Comment |
|---|---|---|
| TP-44045 | _project_ (175) - Tap to click will invalid for few seconds after 2 or 3 finger slide on pad | Improve conmunication between API and Kernel Driver.; |
| TP-44046 | _project_ (176) - Continue tap the 2-finger on the touchpad surface will always trigger both of mouse right and left button events. | Improve tap vs drag with 1F and multifingers, as well as communication between API and Kernel Driver.. |
| TP-44244 | Task tray Synaptics icon, "Pressure graph" and "MoodPad" items cannot be seen. | Fixed the wrong location of popmenu by right clicking trayicon, when the size of all items is set to 150% in control panel. |
| TP-44299 | Right side, down side "Return at edge of screen" in Momentum doesn't work | Fixed the bounce off screen edge in momentum not working issue, when the size of all items is set to 150% in control panel. |
| TP-44300 | Enable Tap zone, even touch right up corner, Maximum windows doesn't work | Fixed the issue of maximizing windows not working, when the size of all items is set to 150% in control panel. |
| TP-44348 | Switch from VS2005 to VS2012 by Default | Save 2005 solution; Switch from VS2005 to VS2012 by Default Use include and lib files from T drive; Bump SynTPCo19.dll to SynTPCo20.dll; SynDell;share\Png; Solution files; KmdfLibraryVersion = 1.11, WdfCoInstaller01011.dll; SynOsLib dir.lst; Remove ...2012.sln files; Inf2Cat; forcetext2bin; Use Include and lib files from T drive |
| TP-44457 | 16.6.5 sony2006.inf Two-Finger horizontal scroll failed. | Only read application specific settings when apps switch happens, otherwise some user specific settings will be overridden if CPL is opened and changes are not apllied. |
| Disabled edge swipe by default. | ||
|
TP-43625 (921264) |
The right click no function via Forced Pad. | Set right default action for corner zone. |
| TP-43853 | Two-Finger Click Implementation on ForcePad | Use per-finger force to determine Left vs. Right click when 2 fingers are present on the ForcePad. |
| TP-44269 | FP: Potential system hang issue if ForceModel is not correct. | Prevent a crash that occurs if the ForceModel is larger than the buffer allocated to hold it. |
| TP-44350 | FP: use Center Press Calibration data from firmware | Use the calibration data from the device firmware.; Use the calibration data from the device firmware. |
| TP-44419 | 2 finger horizental scrolling will switch picture in Windows Photo Viewer | Disabled 2 finger horizontal scroll for all photo applications to avoid sending left/right key to photo Apps |
| TP-44497 | FP: force reconstruct is yielding lower than expected values | Added calibration factor for ForcePad reconstructed force. |